Our Fume Scrubber works with a minimum of 30 PSI scrubber reagent inlet pressure and has an all-plastic acid and alkali resistance construction.
The benchtop stand to sit on is included in our Fume Scrubber and it connects to hoods and instruments using 5” ID flexible tubing.
It comes with water flow regulator and in-line pressure regulator and has flow drop of around 40% @ 2,400 ft/min and a Gravity drain outlet for scrubbing effluent.
When connected, Questron’s Exhaust Blower provides a minimum of 95 L/s (200 CFM) of air drawn from the exhaust port of the Vulcan workstation. This is needed when an external source of exhaust draw is not available at the installation site. However, if you have a ready source of acid-resistant fume draw capability available on site, then this Automated Laboratory Equipment may be used instead of the Questron exhaust blower. An acid-resistant flexible hose of 12.7 cm (5 inches) diameter is connected to the output port of the blower, the other end of which will discharge the exhaust contents into a laboratory exhaust outlet point (such as a fume hood or another fume discharge port).
Our Reagent Storage Cabinet provides a convenient and safe means of storing the reagent bottles that supply various reagents to the Vulcan workstation. Up to 6 x 2.5 liters bottles of reagents can be stored in one layer inside this cabinet. This cabinet is made out of corrosion-resistant material and is designed to catch spillage if any. It is normally placed beside the electronics bay of Vulcan workstation and can have 6 x Teflon reagent tubes entering it through 6 x inlets. These reagent tubes carry the reagents to the acid dispense port of the workstation.
Automated Laboratory Equipment can also be coupled with the Vulcan exhaust manifold by connecting one end of a 16mm (5/8˝) OD vinyl tube (provided) to the fume outlet and the other end to the fume inlet on the Vulcan exhaust manifold for easy removal of reagent fumes.
Browse a comprehensive selection of “Laboratory Supplies” and “Lab Equipment” from a wide variety of custom-made lab products and equipment available only on qtechcorp.com. Our major distributions countries include the USA, China & Canada.
Accommodates 6 x 2.5 litters standard reagent/acid bottles Two internal compartments separate liquids that pose a danger if fumes mix Two side windows for easy liquid level viewing Acid and corrosion resistant material Designed to catch spills Gas seal entry ports for reagent tubing Connects to exhaust line for reagent fume removal Dimensions (W x D x H): 57.5 x 38 x 38 cm / 22.5 x 15 x 15 in Contact us if you need a custom size.View More
Many laboratory practices require digested samples be preserved for stipulated periods of time. This Sample Cart is made from chemical resistant material and will accommodate 840, 50 mL samples. The shelves that hold the sample tray holders are inclined to prevent tray holders from accidentally sliding off the cart. For easy access, the cart has 4 compartments.View More Download brochure
Our Fume Scrubber works with a minimum of 30 PSI scrubber reagent inlet pressure and has an all-plastic acid and alkali resistance construction. The benchtop stand to sit on is included in our fume hood scrubber system and it connects to hoods and instruments using 5” ID flexible tubing. It comes with water flow regulator and in-line pressure regulator and has flow drop of around 40% @ 2,400 ft/min and a Gravity drain outlet for scrubbing effluent. More than 90% efficiency for most exhaust constituents Low scrubber reagent consumption of 1 liter per minute Up to 98% of Cyclonic mist retention Works best with exhaust flow across from 1,000 . . .View More Download brochure
Questron provides a variety of vials made from Teflon, polypropylene, glass and quartz materials. We are aware of the uniqueness of applications and special requirement arising from it. Standard vials are 25, 50 and 100 mL. Do you need a custom vial? Contact us if you need a custom size.View More